Case Studies / Gallery

Below are a few of the many projects we have completed in the last 7 years.

Need help with a project like these, get in touch?


PORTABLE CONDITION MONITORING/VIBRATION ANALYSIS

This was made for a customer who had multiple pump failures, it identified the wrong type of bearing had been fitted when the pumps had been refurbished.

  •  Reliable permanent monitoring of the overall vibration to DIN ISO 10816
  • Protection against permanent machine overload and unexpected standstill
  • Decentralised monitoring of plant and equipment integrated into the machine
  • Compact field units and modular control cabinet systems
  • From compact, analogue vibration sensors in the field to intelligent diagnostic electronics in the control cabinet

CORE DISPENSING MACHINE

Working alongside a bespoke machine manufacturer we designed and built the control system utilising Siemens S7 technology and programmed the logic for the machine control.


DRY ICE AUGER SCREW CONTROL PANEL

Working alongside an engineering company who were tasked with refurbishing an auger screw and modifying it so the screw output can be controlled, which is used for dispensing dry ice onto a conveyor system. We designed and built the control system utilising a Parker AC10 drive.


PUMPHOUSE MCC INSTALLATION

We were tasked with the installation of a new PLC controlled MCC control system for a customer who was upgrading the aged/dated existing system.


AUTO CHANGEOVER & 500AMP DISTRIBUTION BOARD INSTALLATION

We were asked to design and install a new distribution system with the facility for automatic mains changeover should the supply be lost.

Scroll to Top